Health care grade NM-PVP 30 products can dissolve in water and grain alcohol, isopropyl alcohol or chloroform, but not in acetone or diethyl ether. Have good absorption moisture, film-forming, complex ability. It is a high performance, versatile polymer widely used in health care fields.
NM-Carbomer
10 G
NM-Carbomer
10G meets the current edition
of the following monographs:
United
States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer
Interpolymer Type A
China Pharmacopeia (ChP) monograph for Carbomer Interpolymer
Carbomer 10 or Carbopol Ultrez 10 is its comestics grade carbomer .
NM–EM 305
INCI Name: Acrylic acid (ester)/ammonium methacrylate
copolymer &C13-14 Isoparaffin
NM-EM 305 isthe first
multifunctional and liquid polymer in cosmetics produced by inverse emulsion
polymerization. Pre-neutralized and effective over a wide pH range, NM-EM305
has revolutionized formulation habits. It is not only a thickening agent, but
also an excellent stabilizer and
texturizing agent. These properties have paved the way for new sensory Benefits.
NM-Carbomer
974P
NM-Carbomer
974P meets the current
edition of the following monographs:
United States Pharmacopeia/National
Formulary (USP/NF) monograph for Carbomer Homopolymer Type B(Note: The
previous USP/NF compendial name for this product was Carbomer /carbopol 934P.)
European Pharmacopeia (Ph. Eur.) monograph for Carbomers
Chinese
Pharmacopoeia (ChP.)
monograph for Carbomer Homopolymer Type B
General Product Characteristic
Appearance: White fluffy
powder
Odor: Slightly acetic
NM-CarbomerAqua30
INCI Name: Acrylates
Copolymer
NM-Carbomer Aqua 30 is a
lightly crosslinked alkali-swellable acrylic emulsion polymer. It is supplied
as a 30% active polymer in water. NM-Carbomer Aqua 30 has long flow
characteristics with relatively low viscosity. It is designed to suspend,
stabilize, and thicken products containing surfactants and detergents. It is
recommended for use in car wash applications, hard surface cleaners, and high
surfactant gel applications.
Carbomer Homopolymer Type B
NM-Carbomer
934P
Meeting the current edition
of the following monographs:
United States Pharmacopeia/National
Formulary (USP/NF) monograph for Carbomer Homopolymer Type B
European Pharmacopeia (Ph. Eur.) monograph for Carbomers
Chinese
Pharmacopoeia (ChP.)
monograph for Carbomer Homopolymer Type B
Japanese Pharmaceutical Excipients (JPE) monograph for Carboxyvinyl Polymer
INCI Name:
Carbomer
Appearance: White fluffy
powder
Odor: Slightly acetic
Carbomer Homopolymer Type A
Including
NM-Carbomer 971P,NM-Carbomer 71G and NM-Carbomer 981G.
And meets the current edition of the following
monographs:
United States Pharmacopeia/National
Formulary (USP/NF) monograph for Carbomer Homopolymer Type A
European Pharmacopeia (Ph. Eur.) monograph
for Carbomers
China Pharmacopeia (ChP) monograph for Carbomer Homopolymer Type A
Japanese Pharmaceutical Excipients (JPE) monograph for Carboxyvinyl Polymer
General Product
Characteristics
Appearance: White, fluffy
powder
Odor:
Slightly acetic
Carbomer Homopolymer Type B
Including
NM-Carbomer 934P, NM-Carbomer974P
And meets the current edition of the following monographs:
United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Homopolymer Type B
European Pharmacopeia (Ph. Eur.) monograph for Carbomers
China Pharmacopeia (ChP) monograph for Carbomer Homopolymer Type B
Japanese Pharmaceutical Excipients (JPE) Monograph for Carboxyvinyl Polymer
General Product Characteristics
Appearance: White, fluffy powder
Odor: Slightly acetic
NM-PA 690
Chemical Name: Polyacrylic
acid
NM-PA 690 is a cross-linked
polyacrylate polymer as a high-efficient
water-soluble adhesive and rheology modifier.
It can provide high viscosity, excellent thickening and
suspending performance with
low-dosage. It performs well in challenging low and high pH formulation
system and extensively applied in general cleaning agents, water-based
adhesives, battery gels etc. When neutralized by alkali it forms sparkling
clear water or hydroalcoholic gels and creams.
NM-ST 2641 Rheology Control
Additive
Synthetic thickener
NM-ST 2641 Rheology
Control Additive is a powdered synthetic thickener based on polyacrylic acid.
Being used in aqueous systems for a variety of different purposes in printing,
coating or other technical applications. It demonstrates efficient thickening
performance and flexibility in formulation for different end-uses. This polymer
is un-neutralized and requires addition of an appropriate neutralizing agent to
achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST
2641 show suitable viscosity and yield stress and can be used for suspending
pigments or other particles in an aqueous system.
NM-ST 2623 Rheology Control
Additive
Synthetic thickener
NM-ST 2623 Rheology control additive is a powdered synthetic
thickener based on polyacrylic acid. Being used in aqueous systems for a
variety of different purposes in printing, coating or other technical
applications.
It
demonstrates ion insensitivity to electrolytes which may be present in dye
printing systems, combined with efficient thickening performance. This resin is un-neutralized
and requires addition of an appropriate neutralizing agent to achieve maximum
thickening efficiency. Neutralized dispersions of the NM-ST 2623 show high
viscosity and high yield stress and can be used for suspending pigments or
other particles in an aqueous system.
NM-ST A30 Rheology Control
Additive
Alkali swellable emulsion thickener
NM-ST A30 Rheology Control Additive is a 30% active
polymeric water-based thickener which will improve dispersion rheology and
settling in aqueous paints and inks.