Features and Benefits
l Allows for cold or hot processing enabling flexible processing requirements.
l Easy to use, extremely fast dispersing, ultra-efficient cold process possible emulsifier appropriate for sustainable formulations.
l Emulsify the highest levels of oil, up to 50% by weight
l Effectively stabilizes emulsions over a broad pH range: 4 to 10
l Formulation flexibility allowing smooth textures through minimized structuring with other formulation ingredients
l High emulsion stability at low use levels
l Mild emulsion stabilizer suitable for sensitive skin applications
l No ethoxylated material was intentionally added in the manufacturing of this product
l No HLB calculation required when formulating
Application
l After Shave (Skin Care) l Anti-aging Products (Skin Care) l Body Lotions/Creams/Gels (Skin Care)
l Color Cosmetics (Skin Care) l Eye Area Skin Care Products l Facial Care Products (Skin Care)
l Hand/Foot Care (Skin Care) l Sun Care (Skin Care) l Wipes (Skin Care)
Formula Guidelines
l Typical use 0.05 to 1.0 wt.%
l Sprinkle the polymer onto the surface of the water without any special equipment or handling. The powder will self-wet and drop below the surface in minutes. When there is no visible white powder on the water surface, begin agitation.
l Extremely high shear (>5,000 rpm) mixers or homogenizers should be cautiously used because high shear impact and destroy the polymer gel structure resulting in permanent viscosity loss.
l Reduced processing time is possible if the polymer is added to warm water. The optimal water temperature is 30-40°C.
l Upon neutralization, a grainy appearance may be noted initially. Using gentle mixing will yield a smooth gel.
l Polymer clumping can occur if the polymer is added to water and agitation is started before the polymer is allowed to self-wet. This can be avoided by adding the polymer to water under moderate agitation.
en
es
