NM-Carbomer 940HC

NNM-Carbomer 980HC is a cross-linked polyacrylate polymer. HC means very High Clarity. It is used as a high-efficient rheology modifier, capable of providing high viscosity, excellent clarity.

NM-Carbomer 35 INCI Name: Acrylates/C10-30 Alkyl Acrylate Crosspolymer An innovative ethoxy-free acrylate-based polymeric emulsifier that achieves excellent lipid tolerance without addition of other traditional emulsifiers. It provides good suspending, smooth texture, and a mild , pleasant fresh sensory for emulsions in the  non-traditional emulsifier formulation designed for sensitive skin, while showing excellent performance in a low viscosity (<500 mPa·s) transparent suspension system.

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. 

NM-Carbomer 970 is a cross-linked polyacrylate polymer, polymerized in co-solvent system of ethyl acetate and cyclohexane. It can provide high viscosity, excellent thickening and suspending performance with low-dosage. Its short flow (non-drip) properties are ideal for applications such as clear gels, hydroalcoholic gels, hand sanitizing gels, creams. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams.

Carbomer 996/NM-Carbomer 996 is a cross-linked polyacrylate polymer. It is used as a high-efficient rheology modifier, capable of providing high viscosity, excellent thickening and suspending performance with low-dosage. It is also widely used in O/W lotions and creams as a favorable suspending agent.

NM-ST 2342 Rheology Control Additive Synthetic thickener NM-ST 2342 rheology control additive is a powdered synthetic thickener based on polyacrylic acid. Being used in aqueous systems for a variety of different purposes in printing, coating or other technical applications. It demonstrates ion insensitivity to electrolytes which may be present in dye printing systems, combined with efficient thickening performance. This resin is un-neutralized and requires addition of an appropriate neutralizing agent to achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST 2342 show high viscosity and high yield stress and can be used for suspending pigments or other particles in an aqueous system.