PVP K30

NM-PVP K90 can dissolve in water and grain alcohol, isopropyl alcohol or chloroform, but not in acetone or diethyl ether. Have good absorption moisture, film-forming, complex ability. It is a high performance, versatile polymer widely used in health care field.

NM-Carbomer 974P  NM-Carbomer 974P meets the current edition of the following monographs: United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Homopolymer Type B (Note: The previous USP/NF compendial name for this product was Carbomer 934P.)  European Pharmacopeia (Ph. Eur.) monograph for Carbomers  Chinese Pharmacopoeia (ChP.) monograph for Carbomer Homopolymer Type B   General Product Characteristic  Appearance: White fluffy powder  Odor: Slightly acetic

NM-Carbomer 940HC is a cross-linked polyacrylate polymer. HC means very High Clarity. It is used as a high-efficient rheology modifier, capable of providing high viscosity, excellent clarity. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams. Also, application in for sanitizing gels. hydroalcoholic gel, antibacterial gel hand, hand gel sanitizer.

NM-PA 674 Chemical Name: Polyacrylic acid  NM-PA 674 is a cross-linked polyacrylate polymer as a high-efficient water-soluble adhesive and rheology modifier. It can provide high viscosity, excellent thickening and suspending performance . It performs well in challenging low and high pH formulation system and extensively applied in general cleaning agents, water-based adhesives, battery gels etc. 

NM –Carbomer EZ-3 NM-Carbomer EZ-3 is a hydrophobically modified cross-linked acrylate copolymer, providing high viscosity with smooth flow properties. It is an efficient, self-wetting rheology modifier designed to impart thickening, emulsion stabilization and suspension properties to a wide range of home care products. Carbopol EZ-3 polymer is an easy to use, all-purpose product for use in applications where high efficiency, moderate electrolyte tolerance, good emulsion stabilization, and ease of handling are key requirements. 

NM-ST 2623 Rheology Control Additive Synthetic thickener NM-ST 2623 Rheology control additive is a powdered synthetic thickener based on polyacrylic acid. Being used in aqueous systems for a variety of different purposes in printing, coating or other technical applications. It demonstrates ion insensitivity to electrolytes which may be present in dye printing systems, combined with efficient thickening performance. This resin is un-neutralized and requires addition of an appropriate neutralizing agent to achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST 2623 show high viscosity and high yield stress and can be used for suspending pigments or other particles in an aqueous system.