Carbomer 20/NM – Carbomer 20
INCI
Name: Acrylates/C10-30 Alkyl Acrylate Crosspolymer
It have higher electrolyte tolerance and handle a higher level of surfactant actives, being ideally suited for use in formulations containing higher levels of oils, botanical ingredients, or actives like Sodium PCA.Even at high concentration, NM-Carbomer20 maintains excellent clarity
NM–Carbomer
21 isahydrophobically modified cross-linked acrylate
copolymer,provides high viscosity with
short flow properties.
It self-wets and disperses quickly in minutes, which
remarkably meets formulators’ ease-use need.
It delivers excellent thickening
efficiency at a wide pH range which makes it a good choice for wide
applications.
It is ideally suited for use in formulations containing higher
levels of oils, botanical ingredients, or humectants like Sodium PCA.
NM-Carbomer
21 also providesgood electrolyte tolerance and
unique sensory benefits in formulations. Even at high concentration, maintains excellent clarity.
NM–Carbomer 21 is a hydrophobically modified cross-linked acrylate copolymer, provides high viscosity with short flow properties. Its self-wets and disperses quickly in minutes, which remarkably meets formulators’ ease-use need. It delivers excellent thickening efficiency at a wide pH range which makes it a good choice for wide applications. It is ideally suited for use in formulations containing higher levels of oils, botanical ingredients, in formulations containing higher levels of oils, botanical ingredients, and and hydroalcoholic gel, antibacterial gel hand, hand gel sanitizer, sanitizer gel with alcohol.. Even at high concentration, NM-Carbomer21 maintains excellent clarity.
NM–Carbomer 21 is a hydrophobically modified cross-linked acrylate copolymer, provides high viscosity with short flow properties. Its self-wets and disperses quickly in minutes, which remarkably meets formulators’ ease-use need. It delivers excellent thickening efficiency at a wide pH range which makes it a good choice for wide applications. It is ideally suited for use in formulations containing higher levels of oils, botanical ingredients, in formulations containing higher levels of oils, botanical ingredients, and hydroalcoholic gel, antibacterial gel hand, hand gel sanitizer, sanitizer gel with alcohol.
NM-Carbomer
10 G
NM-Carbomer
10G meets the current edition
of the following monographs:
United
States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer
Interpolymer Type A
China Pharmacopeia (ChP) monograph for Carbomer Interpolymer
Carbomer 10 or Carbopol Ultrez 10 is its comestics grade carbomer .
NM –Carbomer 30
INCI
Name: Carbomer
NM-Carbomer
30 is a white powder, cross-linked homopolymer of polyacrylic acid that is
polymerized in a toxicologically preferred cosolvent system. It offers good
electrolyte tolerance, high thickening performance in a broad pH range, and a
rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30
allows the formulator to achieve desired rheological and aesthetic properties
in the presence of electrolytes or acidic actives required for consumer
products. Its high electrolyte tolerance and broad pH compatibility make it
ideal for formulating products with botanical extracts or water-soluble salts,
as well as acidic ingredients such as alpha hydroxy acids, salicylic acid, or
organic acid preservatives.
NM-Carbomer 30 is the equivalent with Carbopol Ultrez 30 polymer.
Its property is similar to carbopol Ultrez 10 polymer, carbopol Ultrez 20 polymer.
Features and Benefits
l
Rapid wetting
properties
l
Electrolyte
tolerant at higher polymer levels, allowing for the creation of formulations
with pleasant aesthetics in systems containing electrolytes
l
Offers
a pleasant sensorial experience with its rich creamy sensory and high clarity
in gels
l
Offers
excellent rheology and suspension in challenging acidic or electrolyte
containing skin care systems
l
Thickens
efficiently at low levels (0.1-0.2 wt%) in electrolyte-free systems, making it
a good candidate for formulating simple chassis
l
Thickens
over a broad pH range (pH 4.0-12.0), enabling potential applications with
active ingredients at low or high pH
Recommended Applications
l
Hydroalcoholic
gels
l
sanitizing gels
l
Hand,
body and face lotions
l
Hand
sanitizers
l
Moisturizing
gels
l
Sunscreen
lotions
l
Shampoos
Formula Guidelines
l
Typical
use 0.1 to 1.0 wt%
l
Sprinkle
polymer on surface of water and allow to self- wet
l
Agitation
must be processed gently
l
Pre-
or post-neutralization is workable, depending
on application
NM-ST 2641 Rheology Control
Additive
Synthetic thickener
NM-ST 2641 Rheology
Control Additive is a powdered synthetic thickener based on polyacrylic acid.
Being used in aqueous systems for a variety of different purposes in printing,
coating or other technical applications. It demonstrates efficient thickening
performance and flexibility in formulation for different end-uses. This polymer
is un-neutralized and requires addition of an appropriate neutralizing agent to
achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST
2641 show suitable viscosity and yield stress and can be used for suspending
pigments or other particles in an aqueous system.
NM-ST 2623 Rheology Control
Additive
Synthetic thickener
NM-ST 2623 Rheology control additive is a powdered synthetic
thickener based on polyacrylic acid. Being used in aqueous systems for a
variety of different purposes in printing, coating or other technical
applications.
It
demonstrates ion insensitivity to electrolytes which may be present in dye
printing systems, combined with efficient thickening performance. This resin is un-neutralized
and requires addition of an appropriate neutralizing agent to achieve maximum
thickening efficiency. Neutralized dispersions of the NM-ST 2623 show high
viscosity and high yield stress and can be used for suspending pigments or
other particles in an aqueous system.
NM-ST 2342 Rheology Control
Additive
Synthetic thickener
NM-ST 2342 rheology control additive is a powdered synthetic
thickener based on polyacrylic acid. Being used in aqueous systems for a
variety of different purposes in printing, coating or other technical
applications.
It
demonstrates ion insensitivity to electrolytes which may be present in dye
printing systems, combined with efficient thickening performance. This resin is un-neutralized
and requires addition of an appropriate neutralizing agent to achieve maximum
thickening efficiency. Neutralized dispersions of the NM-ST 2342 show high
viscosity and high yield stress and can be used for suspending pigments or
other particles in an aqueous system.
NM-ST 2623 Rheology Control
Additive
Synthetic thickener
NM-ST 2623 rheology control additive is a powdered synthetic
thickener based on polyacrylic acid. Being used in aqueous systems for a
variety of different purposes in printing, coating or other technical
applications.
It
demonstrates ion insensitivity to electrolytes which may be present in dye
printing systems, combined with efficient thickening performance. This resin is un-neutralized
and requires addition of an appropriate neutralizing agent to achieve maximum
thickening efficiency. Neutralized dispersions of the NM-ST 2623 show high
viscosity and high yield stress and can be used for suspending pigments or
other particles in an aqueous system.
Carbomer 21
INCI
Name: Acrylates/C10-30 Alkyl Acrylate Crosspolymer
NM–Carbomer
21 is a hydrophobically modified cross-linked acrylate copolymer,
provides high viscosity with short flow properties. Its self-wets and disperses
quickly in minutes, which remarkably meets formulators’ ease-use need. It
delivers excellent thickening efficiency at a wide pH range which makes it a
good choice for wide applications. It is ideally suited for use in formulations
containing higher levels of oils, botanical ingredients, in
formulations containing higher levels of oils, botanical ingredients, and hydroalcoholic gel,
antibacterial gel hand, hand gel sanitizer,
sanitizer gel with alcohol. Even at high concentration,
NM-Carbomer21 maintains excellent clarity.