NM-ST 2342 Rheology Control Additive

NM-ST 2623 Rheology Control Additive Synthetic thickener NM-ST 2623 rheology control additive is a powdered synthetic thickener based on polyacrylic acid. Being used in aqueous systems for a variety of different purposes in printing, coating or other technical applications. It demonstrates ion insensitivity to electrolytes which may be present in dye printing systems, combined with efficient thickening performance. This resin is un-neutralized and requires addition of an appropriate neutralizing agent to achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST 2623 show high viscosity and high yield stress and can be used for suspending pigments or other particles in an aqueous system.

NM–Carbomer 21 isahydrophobically modified cross-linked acrylate copolymer,provides high viscosity with short flow properties. It self-wets and disperses quickly in minutes, which remarkably meets formulators’ ease-use need. It delivers excellent thickening efficiency at a wide pH range which makes it a good choice for wide applications. It is ideally suited for use in formulations containing higher levels of oils, botanical ingredients, or humectants like Sodium PCA. NM-Carbomer 21 also providesgood electrolyte tolerance and unique sensory benefits in formulations. Even at high concentration, maintains excellent clarity.

NM-PA 940 HC Chemical Name: Polyacrylic acid   NM-PA 940HC is a cross-linked polyacrylate polymer as a high-efficient water-soluble adhesive and rheology modifier. It can provide high viscosity, excellent thickening and suspending performance with low-dosage. It performs well in challenging low and high pH formulation system and extensively applied in general cleaning agents, water-based adhesives, battery gels etc. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams. 

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. Its high electrolyte tolerance and broad pH compatibility make it ideal for formulating products with botanical extracts or water-soluble salts, as well as acidic ingredients such as alpha hydroxy acids, salicylic acid, or organic acid preservatives. NM-Carbomer 30 is the equivalent with Carbopol Ultrez 30 polymer. Its property is similar to carbopol Ultrez 10 polymer, carbopol  Ultrez 20 polymer. Features and Benefits l Rapid wetting properties l Electrolyte tolerant at higher polymer levels, allowing for the creation of formulations with pleasant aesthetics in systems containing electrolytes l Offers a pleasant sensorial experience with its rich creamy sensory and high clarity in gels l Offers excellent rheology and suspension in challenging acidic or electrolyte containing skin care systems l Thickens efficiently at low levels (0.1-0.2 wt%) in electrolyte-free systems, making it a good candidate for formulating simple chassis l Thickens over a broad pH range (pH 4.0-12.0), enabling potential applications with active ingredients at low or high pH Recommended Applications l Hydroalcoholic gels l  sanitizing gels l Hand, body and face lotions l Hand sanitizers l Moisturizing gels l Sunscreen lotions l Shampoos Formula Guidelines l Typical use 0.1  to 1.0 wt% l Sprinkle polymer on surface of water and allow to self- wet l Agitation must be processed gently l Pre- or post-neutralization is workable, depending on application

NM-Carbomer 940G NM-Carbomer 940G meets the current edition of the following monographs: United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer 940 General Product Characteristics Appearance: White fluffy powder Odor: Slightly acetic .

NM-PVP K30 can dissolve in water and grain alcohol, isopropyl alcohol or chloroform, but not in acetone or diethyl ether. Have good absorption moisture, film-forming, complex ability. It is a high performance, versatile polymer widely used in health care  field, cosmetics field, beer, water treatment membrane, detergents, paints and other fields..