PVP K90

Health care grade NM-PVP 30 products can dissolve in water and grain alcohol, isopropyl alcohol or chloroform, but not in acetone or diethyl ether. Have good absorption moisture, film-forming, complex ability. It is a high performance, versatile polymer widely used in health care fields.

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. 

NM-ST 2342 Rheology Control Additive Synthetic thickener NM-ST 2342 rheology control additive is a powdered synthetic thickener based on polyacrylic acid. Being used in aqueous systems for a variety of different purposes in printing, coating or other technical applications. It demonstrates ion insensitivity to electrolytes which may be present in dye printing systems, combined with efficient thickening performance. This resin is un-neutralized and requires addition of an appropriate neutralizing agent to achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST 2342 show high viscosity and high yield stress and can be used for suspending pigments or other particles in an aqueous system.

NM-Carbomer 940 H is a cross-linked polyacrylate polymer used in personal care gels and creamsas a high-efficient rheology modifier. It is capable of providing high viscosity, excellent thickening and suspending performance with low-dosage. Its short flow (non-drip) properties are ideal for applications such as clear gels, hydroalcoholic gels, creams. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams.

  NM-Carbomer TR-2P NM-Carbomer TR-2P meets the current edition of the following monographs:   United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Copolymer Type A China Pharmacopeia (ChP) monograph for Carbomer Copolymer Type A General Product Characteristics Appearance: White fluffy powder Odor: Slightly acetic

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. Its high electrolyte tolerance and broad pH compatibility make it ideal for formulating products with botanical extracts or water-soluble salts, as well as acidic ingredients such as alpha hydroxy acids, salicylic acid, or organic acid preservatives. NM-Carbomer 30 is the equivalent with Carbopol Ultrez 30 polymer. Its property is similar to carbopol Ultrez 10 polymer, carbopol  Ultrez 20 polymer. Features and Benefits l Rapid wetting properties l Electrolyte tolerant at higher polymer levels, allowing for the creation of formulations with pleasant aesthetics in systems containing electrolytes l Offers a pleasant sensorial experience with its rich creamy sensory and high clarity in gels l Offers excellent rheology and suspension in challenging acidic or electrolyte containing skin care systems l Thickens efficiently at low levels (0.1-0.2 wt%) in electrolyte-free systems, making it a good candidate for formulating simple chassis l Thickens over a broad pH range (pH 4.0-12.0), enabling potential applications with active ingredients at low or high pH Recommended Applications l Hydroalcoholic gels l  sanitizing gels l Hand, body and face lotions l Hand sanitizers l Moisturizing gels l Sunscreen lotions l Shampoos Formula Guidelines l Typical use 0.1  to 1.0 wt% l Sprinkle polymer on surface of water and allow to self- wet l Agitation must be processed gently l Pre- or post-neutralization is workable, depending on application