NM-Carbomer EZ-3
Features and Benefits
l Rapid self - wetting
l Excellent suspension and stabilization
l Excellent vertical cling and suspension properties
l Good clarity for versatility in system appearance
l High efficiency thickening for very cost-effective formulations
l Provides highest yield stress and most rigid gels
l Provides low misting and controlled spray pattern for effective spray applications
l Thickening and flow control
Recommended Applications
l Hard surface non-aerosol spray cleaners
l All-purpose cleaners
l Hard surface sanitizing
l gels and spray products
l Auto care polishes, waxes and protectants
l Light duty liquid detergents
Formula Guidelines
l Typical use 0.2 to 2.0 wt%
l Sprinkle the polymer onto the surface of the water without any special equipment or handling. The powder will self-wet and drop below the surface in minutes. When there is no visible white powder on the water surface, begin agitation.
l Extremely high shear (>5,000 rpm) mixers or homogenizers should be cautiously used because high shear impact and destroy the polymer gel structure resulting in permanent viscosity loss.
l Upon neutralization, a grainy appearance may be noted initially. Using gentle mixing will yield a smooth gel.
en
es
