Features and Benefits
l Rapid self - wetting
l Excellent suspension and stabilization
l Excellent vertical cling and suspension properties
l Good clarity for versatility in system appearance
l Thickening and flow control
Recommended Applications
l Hard surface non-aerosol spray cleaners
l All-purpose cleaners
l Hard surface sanitizing
l gels and spray products
l Auto care polishes, waxes and protectants
l Light duty liquid detergents
Formula Guidelines
l Typical use 0.2 to 2.0 wt%
l Sprinkle the polymer onto the surface of the water without any special equipment or handling. The powder will self-wet and drop below the surface in minutes. When there is no visible white powder on the water surface, begin agitation.
l Reduced processing time is possible if the polymer is added to warm water. The optimal water temperature is 40-50°C.
l Polymer clumping can occur if the polymer is added to water and agitation is started before the polymer is allowed to self-wet. This can be avoided by adding the polymer to water under moderate agitation.
en
es
