NM-PA 960

NM-PA 940 HC Chemical Name: Polyacrylic acid   NM-PA 940HC is a cross-linked polyacrylate polymer as a high-efficient water-soluble adhesive and rheology modifier. It can provide high viscosity, excellent thickening and suspending performance with low-dosage. It performs well in challenging low and high pH formulation system and extensively applied in general cleaning agents, water-based adhesives, battery gels etc. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams. 

NM-PA 674 Chemical Name: Polyacrylic acid  NM-PA 674 is a cross-linked polyacrylate polymer as a high-efficient water-soluble adhesive and rheology modifier. It can provide high viscosity, excellent thickening and suspending performance . It performs well in challenging low and high pH formulation system and extensively applied in general cleaning agents, water-based adhesives, battery gels etc. 

NM-PA 690 Chemical Name: Polyacrylic acid NM-PA 690 is a cross-linked polyacrylate polymer as a high-efficient water-soluble adhesive and rheology modifier. It can provide high viscosity, excellent thickening and suspending performance with low-dosage. It performs well in challenging low and high pH formulation system and extensively applied in general cleaning agents, water-based adhesives, battery gels etc. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams.  

NM-Carbomer 970 is a cross-linked polyacrylate polymer, polymerized in co-solvent system of ethyl acetate and cyclohexane. It can provide high viscosity, excellent thickening and suspending performance with low-dosage. Its short flow (non-drip) properties are ideal for applications such as clear gels, hydroalcoholic gels, hand sanitizing gels, creams. When neutralized by alkali it forms sparkling clear water or hydroalcoholic gels and creams.

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. Its high electrolyte tolerance and broad pH compatibility make it ideal for formulating products with botanical extracts or water-soluble salts, as well as acidic ingredients such as alpha hydroxy acids, salicylic acid, or organic acid preservatives. NM-Carbomer 30 is the equivalent with Carbopol Ultrez 30 polymer. Its property is similar to carbopol Ultrez 10 polymer, carbopol  Ultrez 20 polymer. Features and Benefits l Rapid wetting properties l Electrolyte tolerant at higher polymer levels, allowing for the creation of formulations with pleasant aesthetics in systems containing electrolytes l Offers a pleasant sensorial experience with its rich creamy sensory and high clarity in gels l Offers excellent rheology and suspension in challenging acidic or electrolyte containing skin care systems l Thickens efficiently at low levels (0.1-0.2 wt%) in electrolyte-free systems, making it a good candidate for formulating simple chassis l Thickens over a broad pH range (pH 4.0-12.0), enabling potential applications with active ingredients at low or high pH Recommended Applications l Hydroalcoholic gels l  sanitizing gels l Hand, body and face lotions l Hand sanitizers l Moisturizing gels l Sunscreen lotions l Shampoos Formula Guidelines l Typical use 0.1  to 1.0 wt% l Sprinkle polymer on surface of water and allow to self- wet l Agitation must be processed gently l Pre- or post-neutralization is workable, depending on application

NM-Carbomer 941G meets the current edition of the following monographs: United States /National Formulary (USP/NF) monograph for Carbomer 941 Appearance: White fluffy powder Odor: Slightly acetic