carbomer 971P

NM-Carbomer 956                               NM-Carbomer 956 meets the current edition of the following monographs:   United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Homopolymer Type B European Pharmacopeia (Ph. Eur.) monograph for Carbomers Chinese Pharmacopoeia (ChP.) monograph for Carbomer Homopolymer Type B Carbomer 956 , and carbomer 934P and 974P are almost the same property for oral care products.

NM-Carbomer 980G NM-Carbomer 980G meets the current edition of the following monographs: United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Homopolymer Type C (Note: The previous USP/NF compendial name for this product was Carbomer 980.) European Pharmacopeia (Ph. Eur.) monograph for Carbomers China Pharmacopeia (ChP) monograph for Carbomer Homopolymer Type C General Product Characteristics Appearance: White fluffy powder Odor: Slightly acetic

Chemical Name Vinylpyrrolidone/ vinylacetate copolymers CAS # 25086-89-9 Formula (C6H9NO)n(C4H6O2)m Synonym PVP-VA Chemical Structure

NM-Carbomer 971P NM-Carbomer971P/Carbopol 971P polymers meets the current edition of the following monographs: United States Pharmacopeia/National Formulary (USP/NF) monograph for Carbomer Homopolymer Type A European Pharmacopeia (Ph. Eur.) monograph for Carbomers China Pharmacopeia (ChP) monograph for Carbomer Homopolymer Type A General Product Characteristics Appearance: White, fluffy powder Odor: Slightly acetic 

NM-ST 2641 Rheology Control Additive Synthetic thickener NM-ST 2641 Rheology Control Additive is a powdered synthetic thickener based on polyacrylic acid. Being used in aqueous systems for a variety of different purposes in printing, coating or other technical applications. It demonstrates efficient thickening performance and flexibility in formulation for different end-uses. This polymer is un-neutralized and requires addition of an appropriate neutralizing agent to achieve maximum thickening efficiency. Neutralized dispersions of the NM-ST 2641 show suitable viscosity and yield stress and can be used for suspending pigments or other particles in an aqueous system.

NM –Carbomer 30 INCI Name: Carbomer NM-Carbomer 30 is a white powder, cross-linked homopolymer of polyacrylic acid that is polymerized in a toxicologically preferred cosolvent system. It offers good electrolyte tolerance, high thickening performance in a broad pH range, and a rich, distinct sensory in challenging skin care formulations. NM-Carbomer 30 allows the formulator to achieve desired rheological and aesthetic properties in the presence of electrolytes or acidic actives required for consumer products. Its high electrolyte tolerance and broad pH compatibility make it ideal for formulating products with botanical extracts or water-soluble salts, as well as acidic ingredients such as alpha hydroxy acids, salicylic acid, or organic acid preservatives. NM-Carbomer 30 is the equivalent with Carbopol Ultrez 30 polymer. Its property is similar to carbopol Ultrez 10 polymer, carbopol  Ultrez 20 polymer. Features and Benefits l Rapid wetting properties l Electrolyte tolerant at higher polymer levels, allowing for the creation of formulations with pleasant aesthetics in systems containing electrolytes l Offers a pleasant sensorial experience with its rich creamy sensory and high clarity in gels l Offers excellent rheology and suspension in challenging acidic or electrolyte containing skin care systems l Thickens efficiently at low levels (0.1-0.2 wt%) in electrolyte-free systems, making it a good candidate for formulating simple chassis l Thickens over a broad pH range (pH 4.0-12.0), enabling potential applications with active ingredients at low or high pH Recommended Applications l Hydroalcoholic gels l  sanitizing gels l Hand, body and face lotions l Hand sanitizers l Moisturizing gels l Sunscreen lotions l Shampoos Formula Guidelines l Typical use 0.1  to 1.0 wt% l Sprinkle polymer on surface of water and allow to self- wet l Agitation must be processed gently l Pre- or post-neutralization is workable, depending on application